Reducer Ceramic Hose

Reducer ceramic hose is a short piece of tubing typically used to connect the discharge port of a pump with pipes of different diameters. It can be either a concentric reducer, a conical hose on the same axis as the adjacent pipe, or an eccentric reducer with its flat side parallel to the connecting pipe.

Ceramic hoses are designed for applications with severe wet sliding wear and erosion that can quickly wear out conventional rubber mining hoses.


  • Technical Parameter
  • Dimensional data sheet
  • Downloads

Brand: FENGCHI

Model: CH-R series

Nominal diameter: DN80~400

Hose length: customized

Pressure level: 0.1~5Mpa can be customized higher according to requirements

Temperature: rubber + ceramic -20℃~90℃

Connection method: flange, thread, etc.

Flange type: GB, ANSI, GOST, JIS, etc.

Additional options: branches, wear detection system (plug-in or push-button)

Lining: Wear-resistant, corrosion-resistant, high-temperature resistant rubber optional

Reinforcement material: Synthetic fabric and wire

Shell material: UV-resistant, ozone-resistant rubber

Connection material: carbon steel, stainless steel, etc.


Size

Standard

thickness

Max 

thickness

Standard

pressure

Max

pressure

DN
mmmmkpakpa
804.54.510005000
1004.5
610005000
1254.5610005000
1504.5
610005000
2004.51210005000
2504.5
1210005000
3004.51210005000
3504.5
1210005000
4004.51210005000

※ Products are fully customizable, with non-standard specifications available upon request.

※ Standard hose thicknesses are recommended for general slurry applications.